PE-1000 (PE-UHMW) Sheet

PE-1000 (PE-UHMW, ultra-high-molecular-weight polyethylene) has very high wear and impact resistance and a low coefficient of friction; it is the standard material for conveyor and wear strip applications.

Material and sizes

PE-UHMW · PE-1000

PE-1000

White, green and black. An ultra-high-molecular-weight polyethylene whose resistance to abrasive wear and impact is among the highest of all plastics, with good sliding properties. It absorbs no moisture, has little tendency to stick and keeps its impact strength at temperatures as low as −200 °C. Its continuous service temperature is limited to about 80 °C, and it is difficult to bond.

STANDARD

EN ISO 15527 (10–200 mm)

THICKNESS: 5–100 mm · other sizes on request
SHEET SIZE: 1000 × 2000 · 2000 × 3000 · 2000 × 4000 mm
CONTINUOUS SERVICE TEMP.: 80 °C
ORDERING: Cut to size, minimum order 5 kg

For large-quantity orders, other cut sizes are possible.

Request a quote on WhatsApp Calculate weight ↓Request technical data

Technical data sheets and material certificates are available on request.

PE-1000 (PE-UHMW) sheet weight calculator

Calculate the weight from the size, or the number of sheets needed for a target weight. Your selections are added to the quote message automatically.

SIZE · STANDARD OR CUSTOM

ThicknessmmWidthmmLengthmmQuantitypcs

PE-1000: calculated with a density of 0.93 g/cm³.

TOTAL THEORETICAL WEIGHT

37.20 kg

37.20 kg per piece · quantity: 1

Order terms: Cut to size, minimum order 5 kg. This is a theoretical weight; we invoice on the actual weight as weighed.

YOUR MESSAGE

Hello, I would like a quote for PE-1000 (PE-UHMW) Sheet.
Size: 20 × 1000 × 2000 mm, quantity: 1 (theoretical ~37.20 kg)

Request a quote for this size on WhatsApp or send by e-mail →

For other plastic sizes, weight-per-metre tables and densities, see the Plastic weight calculator →

Applications

Conveyor wear strips and guides
Silo and hopper lining
Chain guides
Impact and wear plates
Fender pads for harbours and quays

Frequently asked questions

What is the difference between PE-1000 and PE-500?

PE-1000 has a much higher molecular weight, and its wear and impact resistance is markedly higher. PE-1000 is preferred for wear strips, liners and other wear applications; PE-500 is preferred for chopping boards and food applications.

Why can the invoiced weight differ from the calculated weight?

The calculator gives the theoretical weight. The actual weight varies with dimensional tolerances and cutting allowance; we invoice on the actual weight as weighed.

What information should I send for a quote?

We only need the size (thickness × width × length), quantity and delivery location. If you fill in the calculator above, these details are added to the WhatsApp message automatically.