PET-P Sheet

Semi-crystalline PET (PET-P) is also known by the trade name Ertalyte™. It absorbs very little moisture and offers high dimensional stability, high wear resistance and good sliding properties. Suitable for close-tolerance parts.

Material and sizes

PET-P · semi-crystalline

PET-P

White and black. It absorbs very little moisture and has high dimensional stability and wear resistance. With low thermal expansion and good creep resistance, it holds its dimensions in humid conditions and is therefore preferred as an alternative to POM for close-tolerance precision parts. It resists weak acids but is not suitable for parts continuously exposed to hot water above about 60 °C or to steam.

Ertalyte® is a registered trademark of Mitsubishi Chemical Advanced Materials.

STANDARD

EN 15860

THICKNESS: 8–100 mm · other sizes on request
SHEET SIZE: Sheet sizes on request
CONTINUOUS SERVICE TEMP.: 100 °C
ORDERING: Cut to size, minimum order 5 kg

For large-quantity orders, other cut sizes are possible.

Request a quote on WhatsApp Calculate weight ↓Request technical data

Technical data sheets and material certificates are available on request.

PET-P sheet weight calculator

Calculate the weight from the size, or the number of sheets needed for a target weight. Your selections are added to the quote message automatically.

ThicknessmmWidthmmLengthmmQuantitypcs

PET-P: calculated with a density of 1.39 g/cm³.

TOTAL THEORETICAL WEIGHT

27.80 kg

27.80 kg per piece · quantity: 1

Order terms: Cut to size, minimum order 5 kg. This is a theoretical weight; we invoice on the actual weight as weighed.

YOUR MESSAGE

Hello, I would like a quote for PET-P Sheet.
Size: 20 × 1000 × 1000 mm, quantity: 1 (theoretical ~27.80 kg)

Request a quote for this size on WhatsApp or send by e-mail →

For other plastic sizes, weight-per-metre tables and densities, see the Plastic weight calculator →

Applications

Close-tolerance machine parts
Food machinery parts
Valve and pump parts
Slide strips and wear parts

Frequently asked questions

PET-P or acetal (POM-C)?

Both are suitable for precision parts. PET-P has better wear resistance and resistance to acids, and keeps its dimensions better at higher temperatures; POM-C is tougher, easier to machine and better suited to hot water and alkalis.

Why can the invoiced weight differ from the calculated weight?

The calculator gives the theoretical weight. The actual weight varies with dimensional tolerances and cutting allowance; we invoice on the actual weight as weighed.

What information should I send for a quote?

We only need the size (thickness × width × length), quantity and delivery location. If you fill in the calculator above, these details are added to the WhatsApp message automatically.