PEEK Sheet

PEEK is a high-performance plastic for continuous service up to about 250–260 °C; it retains much of its strength at high temperature and resists chemicals and wear. It is a lightweight, insulating alternative to metal parts.

Material and sizes

PEEK · natural

PEEK

Beige (natural); black on request. A high-performance plastic for continuous service up to about 250–260 °C. It retains its mechanical strength, stiffness and dimensional stability at high temperatures and resists chemicals, hot water and steam. It is inherently flame-resistant and gives off very little smoke when burning. It is also used to replace metal parts where lower weight and corrosion resistance are needed.

STANDARD

EN 15860

THICKNESS: 5–100 mm · other sizes on request
SHEET SIZE: 500 / 620 / 1000 × 1000–3000 mm (depending on thickness)
CONTINUOUS SERVICE TEMP.: 260 °C
ORDERING: Cut to size, minimum order 5 kg

For large-quantity orders, other cut sizes are possible.

Request a quote on WhatsApp Calculate weight ↓Request technical data

Technical data sheets and material certificates are available on request.

PEEK sheet weight calculator

Calculate the weight from the size, or the number of sheets needed for a target weight. Your selections are added to the quote message automatically.

SIZE · STANDARD OR CUSTOM

ThicknessmmWidthmmLengthmmQuantitypcs

PEEK: calculated with a density of 1.31 g/cm³.

TOTAL THEORETICAL WEIGHT

16.24 kg

16.24 kg per piece · quantity: 1

Order terms: Cut to size, minimum order 5 kg. This is a theoretical weight; we invoice on the actual weight as weighed.

YOUR MESSAGE

Hello, I would like a quote for PEEK Sheet.
Size: 20 × 620 × 1000 mm, quantity: 1 (theoretical ~16.24 kg)

Request a quote for this size on WhatsApp or send by e-mail →

For other plastic sizes, weight-per-metre tables and densities, see the Plastic weight calculator →

Applications

Semiconductor and electronic components
Pump, valve and compressor parts
High-temperature bearings and bushes
Medical and food machinery parts
Aerospace and automotive parts

Frequently asked questions

PEEK or PTFE?

Both are suitable for continuous service at about 250–260 °C. PEEK is preferred for load-bearing parts that require mechanical strength; PTFE is preferred where sealing, low friction and chemical resistance are the priority.

Why can the invoiced weight differ from the calculated weight?

The calculator gives the theoretical weight. The actual weight varies with dimensional tolerances and cutting allowance; we invoice on the actual weight as weighed.

What information should I send for a quote?

We only need the size (thickness × width × length), quantity and delivery location. If you fill in the calculator above, these details are added to the WhatsApp message automatically.