Brass Square Rod

CW614N (Ms58) brass square rod. For machined square-section parts, locks and fasteners; we cut it to the length you need.

Grade and sizes

CuZn39Pb3 · CW614N

MS58

A free-machining brass containing about 58 % copper, 39 % zinc and 3 % lead. The lead makes the chips short and brittle, so the alloy machines cleanly at high cutting speeds with a good surface finish. It is well suited to hot forging, while its cold formability is limited. It is one of the most widely used brasses for turned and CNC-machined parts, fasteners, fittings and valve components.

INTERNATIONAL EQUIVALENTS

EN CW614N · DIN 2.0401 · UNS C38500 · BS CZ121
Rod standard: EN 12164

SECTION SIZE: 3×3 – 120×120 mm
LENGTH: 3000–3200 mm
CUTTING: Cut to length; no minimum cut length. 15×15 mm and below are normally supplied in full lengths.

For large-quantity orders, other cut sizes are possible.

Request a quote on WhatsApp Calculate weight ↓Request technical data

Chemical composition, mechanical properties and material certificates are available on request.

Brass square rod weight calculator

Calculate the weight from the size, or the length and number of pieces needed for a target weight. Your selections are added to the quote message automatically.

Side lengthmmLengthmmQuantitypcs

MS58: calculated with a density of 8.47 g/cm³.

TOTAL THEORETICAL WEIGHT

3.39 kg

3.39 kg per piece · quantity: 1 · 3.39 kg/m

Order terms: Cut to length; no minimum cut length. 15×15 mm and below are normally supplied in full lengths; if you need a different length, you can mention it in your request. This is a theoretical weight; we invoice on the actual weight as weighed.

YOUR MESSAGE

Hello, I would like a quote for Brass Square Rod.
Size: 20 × 20 × 1000 mm, quantity: 1 (theoretical ~3.39 kg)

Request a quote for this size on WhatsApp or send by e-mail →

For other brass sizes, weight-per-metre tables and densities, see the Brass weight calculator →

Applications

Lock and door hardware components
Electrical terminal and connector blocks
Machined square-section parts
Decorative trim strips

Frequently asked questions

What are the designations for MS58?

MS58: CuZn39Pb3, EN CW614N, DIN 2.0401, UNS C38500, BS CZ121. Any of these designations can be used in your enquiry; we will match the correct material.

Why can the invoiced weight differ from the calculated weight?

The calculator gives the theoretical weight. The actual weight varies with dimensional tolerances and cutting allowance; we invoice on the actual weight as weighed.

What information should I send for a quote?

We only need the size (side × length), quantity and delivery location. If you fill in the calculator above, these details are added to the WhatsApp message automatically.