Brass Angle

Ms58 brass angle. Used for decorative edging, cladding and installation work; supplied in full lengths.

Grade and sizes

CuZn39Pb3 · CW614N

MS58

A free-machining brass containing about 58 % copper, 39 % zinc and 3 % lead. The lead makes the chips short and brittle, so the alloy machines cleanly at high cutting speeds with a good surface finish. It is well suited to hot forging, while its cold formability is limited. It is one of the most widely used brasses for turned and CNC-machined parts, fasteners, fittings and valve components.

INTERNATIONAL EQUIVALENTS

EN CW614N · DIN 2.0401 · UNS C38500 · BS CZ121
Profile standard: EN 12167

SECTION SIZE: 10×10×1.5 – 40×40×4 mm
LENGTH: Full lengths, 3000–3200 mm
ORDERING: Sold in full lengths only

Request a quote on WhatsApp Calculate weight ↓Request technical data

Chemical composition, mechanical properties and material certificates are available on request.

Brass angle weight calculator

Calculate the weight from the size, or the length and number of pieces needed for a target weight. Your selections are added to the quote message automatically.

Leg AmmLeg BmmThicknessmmLengthmmQuantitypcs

MS58: calculated with a density of 8.47 g/cm³.

TOTAL THEORETICAL WEIGHT

1.93 kg

1.93 kg per piece · quantity: 1 · 0.64 kg/m

Order terms: Sold in full lengths only. This is a theoretical weight; we invoice on the actual weight as weighed.

YOUR MESSAGE

Hello, I would like a quote for Brass Angle.
Size: 20 × 20 × 2 × 3000 mm, quantity: 1 (theoretical ~1.93 kg)

Request a quote for this size on WhatsApp or send by e-mail →

For other brass sizes, weight-per-metre tables and densities, see the Brass weight calculator →

Applications

Stair nosings
Decorative corner and edge protection
Furniture and display cases
Architectural cladding

Frequently asked questions

What are the designations for MS58?

MS58: CuZn39Pb3, EN CW614N, DIN 2.0401, UNS C38500, BS CZ121. Any of these designations can be used in your enquiry; we will match the correct material.

Why can the invoiced weight differ from the calculated weight?

The calculator gives the theoretical weight. The actual weight varies with dimensional tolerances and cutting allowance; we invoice on the actual weight as weighed.

What information should I send for a quote?

We only need the size (leg sizes × thickness × length), quantity and delivery location. If you fill in the calculator above, these details are added to the WhatsApp message automatically.