Aluminium Hexagon Bar

Aluminium hexagon bar in grade 6061 (other grades on request), for nuts, fittings and turned parts.

Grade and sizes

AlMg1SiCu · EN AW-6061

6061

A general-purpose, heat-treatable structural alloy with magnesium, silicon and a small copper content. In the T6 temper it combines good strength, corrosion resistance and weldability, and it is easy to machine and anodise. Its properties are very close to those of 6082, and it is frequently specified on drawings prepared to American (ASTM) standards. Used for machine and fixture parts, profiles, fittings, and automotive and marine applications.

INTERNATIONAL EQUIVALENTS

EN AW-6061 · DIN 3.3211
Bar standard: EN 755-2 · tolerances EN 755-6

ACROSS FLATS (A/F): Available on request
LENGTH: 3 m · made-to-order lengths: minimum 300 kg
CUTTING: Cut to length in any quantity. Sizes of 15 mm A/F and below are normally supplied in full lengths (3 m).

For large-quantity orders, other cut sizes are possible.

Request a quote on WhatsApp Calculate weight ↓Request technical data

Chemical composition, mechanical properties and material certificates are available on request.

Aluminium hexagon bar weight calculator

Calculate the weight from the size, or the length and number of pieces needed for a target weight. Your selections are added to the quote message automatically.

Across flats (A/F)mmLengthmmQuantitypcs

6061: calculated with a density of 2.7 g/cm³.

TOTAL THEORETICAL WEIGHT

1.35 kg

1.35 kg per piece · quantity: 1 · 1.35 kg/m

Order terms: Cut to length in any quantity. 15 mm A/F and below are normally supplied in full lengths (3 m); if you need a different length, you can mention it in your request. This is a theoretical weight; we invoice on the actual weight as weighed.

YOUR MESSAGE

Hello, I would like a quote for Aluminium Hexagon Bar.
Size: A/F 24 × 1000 mm, quantity: 1 (theoretical ~1.35 kg)

Request a quote for this size on WhatsApp or send by e-mail →

For other aluminium sizes, weight-per-metre tables and densities, see the Aluminium weight calculator →

Applications

Nuts and fittings
Turned parts
Pneumatic fittings

Frequently asked questions

What are the designations for 6061?

6061: AlMg1SiCu, EN AW-6061, DIN 3.3211. Any of these designations can be used in your enquiry; we will match the correct material.

Why can the invoiced weight differ from the calculated weight?

The calculator gives the theoretical weight. The actual weight varies with dimensional tolerances and cutting allowance; we invoice on the actual weight as weighed.

What information should I send for a quote?

We only need the size (across flats (A/F) × length), quantity and delivery location. If you fill in the calculator above, these details are added to the WhatsApp message automatically.